Optimus KNX Touch Sensor 8-Gang / 16 Buttons

Optimus KNX Touch Sensor, 8-Gang / 16 Buttons

This Optimus KNX Touch Sensor replaces a mechanical switch with a flat glass surface. You assign every one of the 16 buttons in ETS. So the same panel can switch lights, run scenes, drive blinds or set a fan speed.

Where to Use This Panel

This 8-gang panel suits large open-plan rooms, master suites and meeting rooms. In these spaces, many lighting zones, blinds or scenes often need control from a single wall plate. It also pairs well with KNX dimming and blind actuators already on the bus.

Key features

• 16 capacitive buttons arranged in 8 gangs
• Status LEDs with adjustable brightness and night mode
• Switching, dimming, blinds, scenes and value objects per button
• Powered from the KNX bus, no extra supply needed
• Glass front in black or white

You program this sensor with ETS5 or newer, and you mount it on a standard flush box.

Compatibility

• Bus system: KNX twisted pair, to EN 50090 and ISO/IEC 14543-3.
• Configuration: ETS 5 or ETS 6. The manufacturer publishes the product database free of charge.
• Interoperable with KNX-certified devices from any manufacturer. ABB, Schneider, Siemens, Gira, Jung and Theben all sit on the same bus, so this unit works inside a mixed-brand installation.
• Bus supply: 21-30 V DC from a standard KNX power supply.
• Room temperature control: the setpoint and the measured value travel over the bus to KNX valve, fan-coil or underfloor heating actuators. No proprietary cabling.
• Not compatible with Zigbee, Z-Wave, Wi-Fi-only or Matter-only devices unless a KNX gateway is added.

Learn more about the open KNX standard that this sensor follows. Browse the rest of our KNX Sensors range to complete your lighting and HVAC control setup.