Optimus KNX Touch Sensor 2-Gang / 4 Buttons with Thermostat

Optimus KNX Touch Sensor with Thermostat, 2-Gang / 4 Buttons

This Optimus KNX Touch Sensor replaces a mechanical switch with a flat glass surface. You assign every one of the 4 buttons in ETS, so the same panel can switch lights, run scenes, drive blinds or set a fan speed.

This version adds a room thermostat. The display shows the current temperature and the setpoint, and you adjust it straight from the panel.

Key features

• 4 capacitive buttons arranged in 2 gangs
• Status LEDs with adjustable brightness and night mode
• Switching, dimming, blinds, scenes and value objects per button
• Integrated room temperature controller with display
• Powered from the KNX bus, no extra supply needed
• Glass front in black or white

Programmed with ETS5 or newer. Mounts on a standard flush box.

Compatibility

• Bus system: KNX twisted pair, to EN 50090 and ISO/IEC 14543-3.
• Configuration: ETS 5 or ETS 6. The manufacturer publishes the product database free of charge.
• Interoperable with KNX-certified devices from any manufacturer. ABB, Schneider, Siemens, Gira, Jung and Theben all sit on the same bus, so this unit works inside a mixed-brand installation.
• Bus supply: 21-30 V DC from a standard KNX power supply.
• Room temperature control: the setpoint and the measured value travel over the bus to KNX valve, fan-coil or underfloor heating actuators. No proprietary cabling.
• Not compatible with Zigbee, Z-Wave, Wi-Fi-only or Matter-only devices unless a KNX gateway is added.

Learn more about the open KNX standard this sensor is built on. Browse the rest of our KNX Sensors range to complete your lighting and HVAC control setup.