Optimus EDGE KNX Switch Sensor 3-Gang / 6 Buttons

Optimus EDGE KNX Switch Sensor, 3-Gang / 6 Buttons

The Optimus EDGE Automation switch series brings a frameless, modular KNX switch sensor to any wall. This model measures 80 x 120 mm and carries three rocker rows. So you get 6 functions across 3 gangs.

Each button can switch, dim, drive blinds, call scenes, send values or run logic. An RGB status LED gives feedback at a glance, and you can customise the icons too. Choose from white, silver, anthracite and black plastic, or stainless steel with a black matte base.

Compatibility and Installation

You configure this switch sensor in ETS5 or newer. It runs over the standard KNX twisted-pair bus, to EN 50090 and ISO/IEC 14543-3. As a result, it works alongside ABB, Schneider, Siemens, Gira, Jung and Theben devices on the same installation. It mounts on a standard flush box and draws power straight from the bus line. So you need no extra transformer or power supply, which keeps wiring simple and cuts the parts an installer must stock.

Why Choose This Panel

With 3 gangs and 6 functions, this Optimus EDGE KNX Switch Sensor suits small bedrooms, studies and entryways. These spaces often need just a few lighting zones, blinds, or scenes from one wall plate. Because each gang works independently, the same panel can mix switching, dimming, blind control and scene recall. You can also set a different icon per button, so occupants always know what each gang does.

You assign every function in ETS, not in hardware. So you can change the layout at any time after installation, without rewiring. This makes the device a flexible, long-term choice for villas and commercial fit-outs alike.

Learn more about the open KNX standard behind this device. Browse the rest of our KNX Sensors range to find a matching panel for every room.