Schneider KNX Secure Push Button Dynamic Labeling Universal

The Schneider KNX push button dynamic labeling universal module replaces printed paper inserts with a bright display. Therefore you relabel any key in software, and you never open the wall box again.

One module, up to sixteen functions

The universal module carries two to eight rockers. So you match the key count to each room instead of buying a fixed layout. First choose the module. Then add the rockers you need. Finally pick your colours, because you may mix five finishes on one device.

Labeling you change in minutes

You set every function in ETS or in eConfigure KNX. The display then shows the matching icon and text. Schneider offers more than fifty icons, and you may write your own wording. For example, a hotel switches a key from Do Not Disturb to Make Up Room in one download.

Express settings load a ready-made configuration. Extended settings hand you full control. As a result, both integrators and installers work fast.

Comfort and security

• KNX Data Secure protects the whole installation
• An internal sensor reads room temperature and shifts HVAC setpoints
• Night mode dims the display on its own
• Proximity detection wakes the device from twelve centimetres
• An orientation light guides your hand in the dark

Installation and ordering

The KNX bus powers this push button, so you need no extra supply. The box holds the device, a bus connecting terminal and a supporting plate. Moreover you start programming mode from the front or from the back.

Complete your KNX push button dynamic labeling with the 1-gang rocker, the 2-gang rocker, the 3-gang rocker or the 4-gang rocker. Because every rocker clips on by hand, you can rebuild a layout later without tools.