Schneider KNX Push Button 4-Gang with Thermostat System M

The KNX Push Button 4-Gang with Thermostat System M joins the Schneider KNX family that Infinitex supplies across the Emirates. It talks straight to the KNX bus. Therefore one wall plate can switch lights, move blinds, set the room temperature and recall scenes. ETS defines what each key does, so your team can change the logic later without touching a single cable.

Key features

• Original Schneider hardware. The manufacturer warranty covers every unit.
• Certified KNX communication, therefore it fits any standard installation.
• ETS assigns all functions, so a refit needs no new wiring.
• Finishes on offer: White, Cream, Aluminium, Anthracite.
• Villas, apartments, hotel rooms, offices and shops all suit this device.
• It pairs with Schneider actuators, dimmers, sensors and power supplies.

Typical applications

Homes usually give this unit the main lighting groups, the curtains and the temperature setpoint. Offices instead lean on scene recall and on switching whole lighting rows. Many installers add a presence detector next to it. Empty rooms then switch themselves off, so the client saves energy without losing comfort.

Why buy the KNX Push Button 4-Gang with Thermostat System M from Infinitex

We keep Schneider KNX stock in Dubai and ship to Abu Dhabi, Sharjah and the northern Emirates. Contractors and integrators get project pricing, datasheets and commissioning help. Is the specification still open? Our engineers will read your drawings, check the quantities and name the right references before you order. That review prevents the delays that a wrong bill of quantities normally causes.

Programming and after-sales

ETS, the standard KNX tool, configures this range. Our team can build the project file, download it on site and hand the documentation to your client. Later we stay reachable for changes, extra devices and fault finding. This line runs for many years, so you can add spare parts and extensions without a redesign.

See more items in KNX Push Buttons, or ask us for a full KNX bill of quantities.

The Schneider website publishes the manufacturer datasheets.

Compatibility

• Bus system: KNX twisted pair, to EN 50090 and ISO/IEC 14543-3.
• Configuration: ETS 5 or ETS 6. The manufacturer publishes the product database free of charge.
• Interoperable with KNX-certified devices from any manufacturer. ABB, Schneider, Siemens, Gira, Jung and Theben all sit on the same bus, so this unit works inside a mixed-brand installation.
• Bus supply: 21-30 V DC from a standard KNX power supply.
• Room temperature control: the setpoint and the measured value travel over the bus to KNX valve, fan-coil or underfloor heating actuators. No proprietary cabling.
• Not compatible with Zigbee, Z-Wave, Wi-Fi-only or Matter-only devices unless a KNX gateway is added.