ABB KNX LED Dimming Actuator 6-fold 210W

The ABB KNX LED Dimming Actuator UD/S6.210.2.1 belongs to ABB’s current UD/S universal LED dimming actuator range. It sits on the DIN rail in the distribution board and takes its logic power from the KNX bus through an integrated bus coupler. As a result, it dims 6 channels of 230 V AC lighting.

What it does

• It offers 6 independent dimming channels, each rated up to 210 W/VA. You can also parallel outputs for higher-wattage loads on fewer channels.
• It supports trailing-edge and leading-edge dimming for LED, halogen and incandescent lamps, plus inductive and electronic transformers. In addition, automatic load-type detection switches off if needed.
• You can also operate every channel manually from the front panel. This works well during commissioning or a bus failure, and needs no ETS download.
• Each channel has its own neutral connection and a 2 W minimum load.
• This is a genuine ABB product. Infinitex supplies it in Dubai with trade pricing, ETS product data and UAE-wide delivery.

Where this ABB KNX LED Dimming Actuator fits

A 6-channel unit suits a larger apartment or villa floor sharing one distribution board. Because the KNX side is entirely software-defined, the same hardware covers LED, halogen and transformer-fed loads, you set the dimming curve and load type in ETS rather than choosing different hardware.

Technical summary

• Order code: UD/S6.210.2.1
• Channels: 6
• Load rating: up to 210 W/VA per channel (LED trailing-edge, halogen/incandescent, L/C-transformer); lower ratings apply for leading-edge LED loads
• Mounting: DIN rail (MDRC), distribution board
• Bus: KNX TP, integrated bus coupler, powered from the bus
• Manual operation: yes, per channel

This ABB KNX LED Dimming Actuator is built to the official KNX standard. Browse our full KNX dimming actuator range at Infinitex, Dubai.