Schneider KNX Fan Coil Actuator 1-Gang

Schneider KNX Fan Coil Actuator 1-Gang REG — MTN645094

The KNX Fan Coil Actuator joins the KNX bus and works inside a Schneider Electric KNX system. Because it speaks native KNX, it drops into any ETS project. So integrators add it without extra gateways. As a result, it drives one fan-coil unit, controlling fan speeds and valves over KNX.

Why choose this KNX Fan Coil Actuator

First, it installs quickly and neatly. Then, it configures fully in ETS. Moreover, Schneider builds it for daily use in homes, offices and hotels. In short, it gives proven KNX performance. In addition, it manages heating and cooling valves for full climate control.

Key features

• Controls one fan-coil unit
• Multi-speed fan outputs
• Heating and cooling valve outputs
• Manual control buttons on the front
• DIN-rail (REG) mounting

Where to use it

You can fit this KNX Fan Coil Actuator in residential and commercial KNX projects alike. Also, it pairs well with Schneider actuators, sensors and interfaces. Therefore, you build one coherent system. Furthermore, it keeps wiring simple and service easy.

Specifications and setup

You configure the device in ETS. Also, it belongs to the wider Schneider KNX range at Infinitex. Thus, you can source a full system from one place.

• Brand: Schneider Electric
• Reference: MTN645094
• Protocol: KNX (KNX-TP)
• Range: KNX REG actuators
• Configuration: ETS

Infinitex supplies Schneider Electric KNX products in the UAE. Moreover, we offer project pricing and ETS support.

Compatibility

• Bus system: KNX twisted pair, to EN 50090 and ISO/IEC 14543-3.
• Configuration: ETS 5 or ETS 6. The manufacturer publishes the product database free of charge.
• Interoperable with KNX-certified devices from any manufacturer. ABB, Schneider, Siemens, Gira, Jung and Theben all sit on the same bus, so this unit works inside a mixed-brand installation.
• Bus supply: 21-30 V DC from a standard KNX power supply.
• Room temperature control: the setpoint and the measured value travel over the bus to KNX valve, fan-coil or underfloor heating actuators. No proprietary cabling.
• Not compatible with Zigbee, Z-Wave, Wi-Fi-only or Matter-only devices unless a KNX gateway is added.